1.5mm Plain Flywheel for Mashima 10xx Series Motors

This flywheel is designed to fit onto the shaft of motors with 1.5mm shafts, specifically the Mashima 10XX or 12XX series. It is a force fit onto the shaft.

As an option, a recess can be machined into the flywheel to accept the cup part of a Universal Joint set and the flywheel will be supplied with the cup fitted. Using this cup, the motor can have a flywheel on either or both ends of the motor and also connect to the bogies using a 1.5mm diameter shaft.

To keep a copy of the above drawing in JPG form, right click on the drawing and choose 'Save Picture As' from the menu.

Go Back To Products

 

 

<%Navigateshowminicart ""%>
Hollywood Foundry - Copyright 1999-2004 Seamist Pty. Ltd..  All rights reserved.