2.0mm Flywheel to suit Mashima 16xx Series Motors

This flywheel is designed to fit onto the shaft of motors with 2mm shafts, specifically the Mashima 16XX or 18XX series. It is a force fit onto the shaft and has an enlarged hole in one end to accept the cup part of a Universal Joint set. Using this cup, the motor can have a flywheel on either or both ends of the motor and also connect to the bogies using a 1.5mm diameter shaft.

Instructions are included for fitting to the motor and installation of the Universal Joint cup. As an option, the flywheel can be supplied with the cup already fitted.

To keep a copy of the above drawing in JPG form, right click on the drawing and choose 'Save Picture As' from the menu.

Go Back To Products

 

 

<%Navigateshowminicart ""%>
Hollywood Foundry - Copyright 1999-2004 Seamist Pty. Ltd..  All rights reserved.