2.0mm Small Flywheel for Mashima 16xx & 18xx

Series Motors

This flywheel is designed to fit onto the shaft of motors with 2.0mm shafts, specifically the Mashima 16XX or 18XX series. It is a force fit onto the shaft.

The smaller diameter of this flywheel is intended for applications where there is not enough room for the larger 2.0mm flywheel, or where the purchaser simply wants to connect to a 1.5mm shaft.

A recess is machined into the flywheel to accept the cup part of a Universal Joint set and the flywheel canl be supplied with the cup fitted. Using this cup, the motor can have a flywheel on either or both ends of the motor and also connect to the bogies using a 1.5mm diameter shaft.

To keep a copy of the above drawing in JPG form, right click on the drawing and choose 'Save Picture As' from the menu.

Go Back To Products

 

 

<%Navigateshowminicart ""%>
Hollywood Foundry - Copyright 1999-2004 Seamist Pty. Ltd..  All rights reserved.