We only stock the Mashima flat can motors, not the open frame type nor the round can types. And we use the Mashima part names for these motors, not the names adopted in the UK. This may seem confusing, but types listed by UK sellers such as 1420, while dimensionally correct, were never called that by the manufacturer.

All motors stocked by us have double ended shafts, usually 10mm in length. All are sold with metric mounting screws and 100mm of flexible connecting wire.

Select from the links at the beginning of each line for full specifications of each motor.

Mashima MHK-1015 Small flat-sided can motor, 10mm across flats, 15mm length.

Mashima MHK-1020 Small flat-sided can motor, 10mm across flats, 20mm length.

Mashima MHK-1024 Small flat-sided can motor, 10mm across flats, 24mm length.

Mashima MH-1220 Small to medium flat-sided can motor, 12mm across flats, 20mm length.

Mashima MH-1224 Small to medium flat-sided can motor, 12mm across flats, 24mm length.

Mashima MH-1620 Medium flat-sided can motor, 14mm across flats, 16mm round , 20mm length.

Mashima MH-1624 Medium flat-sided can motor, 14mm across flats, 16mm round , 24mm length.

Mashima MH-1626 Medium flat-sided can motor, 14mm across flats, 16mm round , 26mm length.

Mashima MH-1628 Medium flat-sided can motor, 14mm across flats, 16mm round , 28mm length.

Mashima MH-1630 Medium flat-sided can motor, 14mm across flats, 16mm round , 30mm length.

Mashima MH-1632 Medium flat-sided can motor, 14mm across flats, 16mm round , 32mm length.

Mashima MH-1824 Large flat-sided can motor, 18mm across flats, 23mm round , 24mm length.

Mashima MH-1830 Large flat-sided can motor, 18mm across flats, 23mm round , 30mm length.

Mashima MH-1833 Large flat-sided can motor, 18mm across flats, 23mm round , 33mm length.